Alpine IVE-W535BT Uživatelský manuál stáhnout pdf (Strana 46)

100

46-EN

01GB05IVE-W535BT.fm

ALPINE IVE-W535BT 68-21057Z54-A (EN)

Calling the X-OVER adjusted value

Calling the pre-set X-OVER adjusted value.

Touch [Preset1], [Preset2], or [Preset3] on the X-

OVER screen.

The setting stored in the Preset will be recalled.

Setting Defeat

[Defeat] is selected on the Sound setup menu in step 3. Refer to “Sound

Setup Operation” (page 42).

If Defeat is “On,” MX, Bass Max EQ, Download Sound Setting and

Parametric EQ functions are turned OFF. This disables any settings

made for these functions.

Setting item: Defeat

Setting content: Off (Initial setting) / On

Volume Setting

[Volume] is selected on the Sound setup menu in step 3. Refer to

“Sound Setup Operation” (page 42).

You can change the volume of the sound heard when a button is

touched.

Setting item: Sound Feedback

Setting contents: 0 to 7 (Initial setting: 4)

Setting the Volume for Each Source

[Application Volume Setup] is selected on the Sound setup menu in

step 3. Refer to “Sound Setup Operation” (page 42).

The volume level for each source can be adjusted.

Setting item:

Radio / DVD / CD / Compress Media / iPod Music /

iPod Video / AUX / AUX3 / BLUETOOTH Audio

Setting contents: -14 to +14 (Initial setting: 0)

• Settable source differ depending on the connected device and

settings.

About Time Correction

The distance between the listener and the speakers in a car vary widely

due to the complex speaker placement. This difference in the distances

from the speakers to the listener creates a shift in the sounds image and

frequency characteristics. This is caused by the time delay between the

sound reaching the listener’s right versus the left ear.

To correct this, this unit is able to delay the audio signal to the speakers

closest to the listener. This effectively creates a perception of increased

distance for those speakers. The listener can be placed at an equal

distance between the left and right speakers for optimum staging.

The adjustment will be made for each speaker in 3.4cm steps.

Adjust the time correction level of the front left speaker to a high value

and the rear right to zero or a low value.

The sound is not balanced because the distance between the

listening position and the various speakers is different.

The difference in distance between the front left speaker and the rear

right speaker is 1.75 m (68-7/8").

Here we calculate the time correction value for the front left speaker

in the diagram on the above.

Conditions:

Farthest Speaker – listening position : 2.25 m (88-9/16")

Front left speaker – listening position : 0.5 m (19-11/16")

Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")

Time correction = 1.75 ÷ 343*

× 1000 = 5.1 (ms)

Speed of sound: 343 m/s (765 mph) at 20°C

In other words, giving the front left speaker a time correction value of

5.1 ms makes it seem as if its distance from the listener is the same

as the distance to the farthest speaker.

Time correction eliminates the differences in the time required for the

sound to reach the listening position.

The time of the front left speaker is corrected by 5.1 ms so that its

sound reaches the listening position at the same time as the sound of

other speakers.

Example 1. Listening Position: Front Left Seat

5.1ms

2.25m

0.5m

01GB00IVE-W535BT.book Page 46 Sunday, August 5, 2012 6:45 PM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 99 100

Komentáře k této Příručce

Žádné komentáře

Alpine IVE-W535BT Uživatelský manuál Strana 46

Komentáře k této Příručce

Související produkty a manuály pro Přijímače do aut Alpine IVE-W535BT